Bathroom Light Fittings: The light fittings used in zone 1 and zone 2 should be specifically designed for use in wet areas. These fittings are usually made of materials that are moisture. Zone 0 Bathroom Lights are for the inside of the bath or shower itself.
Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof. Zone 1 Bathroom Lights can be used in the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required.
The Ultimate Guide to Bathroom Lighting Zones | Lighting Direct ...
The main bathroom zones include: Zone 0 This is the area in the bath tub, shower enclosure, and basin. In this area, light fittings will most likely come into contact with water or be submerged in water. For zone 0, light fittings need to be at least a minimum of IP67 which means immersion proof.
When thinking about lighting for your bathroom it is important to think about the below Bathroom Zones, to ensure the lighting you want can be installed in your desired location. Zone 0 is inside the bath or shower itself. Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof.
Bathroom Lighting Zones and Regulations Explained
What are bathroom zones and IP ratings? How do you know what IP rating YOU need? We explain how to fit bathroom electrics safely and with legal compliance. When choosing a bathroom light, you may be wondering what lighting zones you should be installing it in. Each bathroom zone requires a different level of water.
Zone 2 is a region within a bathroom that poses a higher risk of electrical hazards due to moisture and water exposure. Understanding the regulations and safety guidelines for Zone 2 lighting is crucial to ensure both functionality and safety in this sensitive area. Perfect products for bathroom lighting Zones 1 and 2, for general bathroom IP rated downlights are listed below.
Understanding Bathroom Lighting and IP Ratings | Value Lights
Are you looking to changing your bathroom lights or designing your new bathroom? Bathroom lighting zones are crucial when it comes to installing bathroom lighting and deciding which type of light can be used where. Due to the high level of moisture present is a bathroom, - compared to other areas in the house - and as electricity and water do not bode well together, awareness of bathroom lighting zones and of light IP ratings (Ingress Protection) is essential to design. Zone 2 Zone 2 is the area outside the bathtub or shower, up to a distance of 0.6 meters from the edge of the bath or shower tray, and 2.25 meters in height.
In this zone, you can use light fittings with an IP20 rating or higher, which provides protection against solid objects larger than 12.5mm.
